H-3 Slanted technical details
Metalium Slanted Louvre are highly innovative and gaining popularity in construction to cover the Ducts and used as a Ventilated facade system. The systems are easy and fast to install with variety of carriers with different louvers inclination. Panels come with a special high quality powder coating finish.
Panel (Galvanized Steel):
Metalium make 84 R, Round edge panels, 84mm wide x 15mm deep x length up to 5mtr. formed out of 0.56 mm TCT Galvanized Steel as per IS-513 fixed on Louver carriers. Panels shall be powder coated on both the surfaces with special high quality Exterior Grade powder to enhance property of Fadeness resistivity.
Panel (Aluminium):
Metalium make 84 R, Round edge panels, 84mm wide x 15mm deep x length up to 5mtr. formed out of 0.71 mm TCT Aluminium alloy (AA) 8011 fixed on Louvre carriers. Panels shall be powder coated on both the surfaces with special high quality Exterior Grade powder to enhance property of Fadeness resistivity.
Paint Detail:
Metalium make 84 R, Round edge panels, 84mm wide x 15mm deep x length up to 5mtr. formed out of 0.56 mm TCT Galvanized Steel as per IS-513 fixed on Louver carriers. Panels shall be powder coated on both the surfaces with special high quality Exterior Grade powder to enhance property of Fadeness resistivity.
Carrier Details:
Black enameled Galvanized Steel Carrier of 39mm wide x 65mm deep x 0.6 mm thick in a standard length of 8’ with cutouts to hold the panel in a module of 69 mm centre to centre at a distance of 1 mtr. Carrier and Suitable structure shall be powder / coil coated on exterior face to enhance properties of Fadeness and corrosion resistivity.
Installation detail:
GS Clit shall be fixed on vertical columns with dash fasteners at distance not more than 1 mtr. centre to centre on which Tubular Stud sections will be laid with corrosion proof screws and on this rigid structure carrier shall be fixed vertically at distance of 1 mtr. Centre to centre. Panel shall be clipped to carriers.
Edge Profile
: Edge profile shall be L- shaped, roll formed out of 0.5mm Galvanized steel / Aluminium strips with coil coating or powder Coating in standard colors.
