Linear 150F

HomefeaturesTechnical Detailsgallery
Metalium 150F, specially designed arrangement make the Ceiling completely interlocked and air tight for a smooth look & uninterrupted appearance, which are able to withstand extreme wind pressure.

150F Panel False Ceiling System.

Panel (Galvanized Steel):

Metalium make 150F Panels are roll formed using state of the art roll forming lines to 150mm wide x 17mm deep x 0.5mm TCT Galvanized Steel as per IS-513 with flush edges. Panel shall be coil coated on external surface only. When two panels are to be joined, they shall be joined together by means of panel coupler suitable for 150F Panel.

Panel (Aluminium):

Metalium make 150F Panels are roll formed using state of the art roll forming lines to 150mm wide x 17mm deep x 0.6mm TCT Aluminium alloys like AA-8011 etc with flush edges. Panel shall be powder coated / coil coated on external surface only. When two panels are to be joined, they shall be joined together by means of panel coupler suitable for 150F Panel.

Paint Detail: Coil coated panel shall be chromatized for maximum bond between metal and paint, enamelled twice under high temperature, one side with full primer and finish coat, the other side (Inner side) with a primer coating and skin coat on continuous paint line or Powder coated panel shall be 50 microns thick on exposed surface.
Suspension System:

For interior application, 150F carrier would be suspended from the roof/truss by 4mm diameter GS wire rod with height adjustment spring steel clips made out of galvanized spring steel or stainless steel. The 4mm dia galvanized rod shall be fixed to slab by forming one end “J” shape with roll inserts. For Exterior application, the carrier would be suspended from the roof / truss by rigid suspension of GS suspension angle with T Leveler at max 1 mtr centre to centre.

Carrier: Carrier shall be 34 mm wide and 48 mm deep with cutouts to hold the panel in a module of

150 mm, carrier shall be roll formed out of 0.6 mm GS coil and cut to a standard length of 2.4 mtr.

When two or more carriers are to be joined, they shall be joined together by means of carrier coupler which will clip on to the holes in the sides of the cut carrier and hold them firmly in place while maintaining the module of 150mm centre to centre.

Lay In 02

Enquiry

Translate »