Z-Shaped Screen

HomefeaturesTechnical Detailsgallery
Z-Shaped Open Screen ceiling profiles that are hung vertically from the suspension to form an open screen linear perspective interior ceilings. It can be seen that Z-Shaped system offers provision for air movement through the ceiling and light fitting, sprinkler etc.

Z-Shaped Screen 100*20 mm (80mm Gap) Open False Ceiling System.

Panel (Aluminium):
Metalium make square edge panels, 100 mm wide x 20 mm wide up to 2.5 mtr with formed out of 0.71 mm TCT Aluminium alloys like AA-8011 etc. Panel shall be powder coated on both the surface. When two panels are to be joined, they shall be joined together by means of panel coupler suitable for Z Shaped Screen Panel.
Panel (Galvanized Steel):
Metalium make square edge panels, 100 mm wide x 20 mm wide up to 2.5 mtr with formed out of 0.55 mm TCT Galvanized Steel as per IS-513. Panel shall be powder coated on both the surface. When two panels are to be joined, they shall be joined together by means of panel coupler suitable for Z Shaped Screen Panel.
Carrier: Carrier shall be 32 mm wide and 42 mm deep with cutouts to hold the panel in a module of 100 mm, carrier shall be roll formed out of 0.45 mm Galvanized steel and cut to a standard length of 2.4 mtr. When two or more carriers are to be joined, they shall be joined together by means of carrier coupler which will clip on to the holes in the sides of the cut carrier and hold them firmly in place while maintaining the module of 100mm centre to centre.
Installation detail: The carrier shall be suspended from slab/truss by 4mm dia galvanized rod & height adjustment powder coated spring steel clips at maximum 1.2 to 1.5 meter centre to centre. The 4mm dia galvanized rod shall be fixed to slab by forming one end “J” shape with roll inserts.
Edge Profile: Edge profile shall be L- shaped, roll formed out of 0.5mm Galvanized steel / aluminium strips with coil coating or powder Coating in standard colors.

Lay In 02

Enquiry

Translate »