Exterior Louvers

Panel (Galvanized Steel):

Metalium make 38 R, Round edge panels, 38mm wide x 15mm deep x length up to 3mtr. Formed out of 0.50 mm TCT Galvanized Steel as per IS-513 fixed on Louver carriers. Panels shall be powder coated on single the surfaces with special high quality Exterior Grade powder to enhance property of Fadedness resistivity.

Panel (Aluminium):

Metalium make 38 R, Round edge panels, 38mm wide x 15mm deep x length up to 3mtr. Formed out of 0.65 mm TCT Aluminium alloy (AA) 8011 fixed on Louvre carriers. Panels shall be powder coated on single the surfaces with special high quality Exterior Grade powder to enhance property of Fadedness resistivity

Carrier:

Carrier shall be 20mm wide at bottom and 42 mm deep with cutouts to hold the panel in a module of 150 mm, carrier shall be roll formed out of 0.45 mm Galvanized steel and cut to a standard length of 2.4 mtr. When two or more carriers are to be joined, they shall be joined together by means of carrier coupler which will clip on to the holes in the sides of the cut carrier and hold them firmly in place while maintaining the module of 150mm centre to centre.

Installation detail:

TGS Clit shall be fixed on vertical columns with dash fasteners at distance not more than 1 mtr. Centre to centre on which Tubular Stud sections will be laid with corrosion proof screws and on this rigid structure carrier shall be fixed vertically / horizontally at distance of 1 mtr. Centre to centre. Panel shall be clipped to carriers.