Metal Ceiling

Linear 84R/184R

Linear 84R 184R has been used extensively on exterior and interior applications and gives designers options for visual design continuity. Panels are clipped into the concealed suspension system to form a closed joint linear ceiling. It will give a rhythm to any Project, where colors & length come together. Various acoustical criteria can be met with the inclusion of acoustical inlays.

Linear 84R/184R/284R Ceiling is known for its attractive and fluid lines. The spaces between the panels may be left open for acoustical or air movement requirements, or closed with separate Flush Cap to give concealed look. Panels can be easily removed & replaced by hand allowing easy and full access to services.

Panel (Galvanized Steel):

Metalium make Round edge panels, 84mm wide x 15 mm deep x length up to 5 mtr. Formed Out of 0.45 / 0.50mm TCT Galvanized steel as per IS-513 fixed on carriers. Panel shall be powder coated / coil coated on external surface only. When two panels are to be joined, they shall be joined together by means of panel coupler suitable for 84R Panel.

Panel (Aluminium):

Metalium make Round edge panels, 84 mm wide x 15 mm deep x length up to 5 mtr. Formed out of 0.65 mm thick TCT Aluminium alloy (AA) 8011-H3 fixed on carriers. Panel shall be powder coated / coil coated on external surface only. When two panels are to be joined, they shall be joined together by means of panel coupler suitable for 84R Panel.

When two panels are to be joined, they shall be joined together by means of panel coupler suitable for 84C Panel.

Paint Detail:

Coil coated panel shall be chromatized for maximum bond between metal and paint, enamelled twice under high temperature, one side with full primer and finish coat, the other side (Inner side) with a primer coating and skin coat on continuous paint line or Powder coated panel shall be 50 microns thick on exposed surface.

Perforation Details 1:

Combine 4mm & 2mm dia, 7mm Centre to Centre in Regular Pattern.

Perforation Details 2:

2mm dia, 7mm Centre to Centre in diagonal Pattern.

Flush Profile of 0.50 mm thick Galvanized Steel / Aluminium and maximum length up to 2.4 mtr. Will be inserted in 16 mm gap between the panels.

Installation detail:

The carrier shall be suspended from slab/truss by 4mm dia galvanized rod & height adjustment powder coated spring steel clips at maximum 1.2 to 1.5 meter centre to centre. The 4mm dia galvanized rod shall be fixed to slab by forming one end “J” shape with roll inserts.

Carrier:

Edge Profile

Edge profile shall be L- shaped, roll formed out of 0.5mm Galvanized steel / Aluminium strips with coil coating or powder Coating in standard colors.