Exterior Louvers

U-Shaped Baffle Multi panels with combination of P25 & P75, P50 & 125 or P25 & P50 panels are an easily mounted and extremely versatile exterior cladding system, can be installed horizontally or vertically. U-Shaped Baffle is an economic but long-lasting solution for external claddings. Shapes, Sizes, Colours, Materials, Metalium truly offers endless choices.

Panel (Galvanized Steel):

U-Shaped Baffle panels are suitable for outside cladding, railing and elevation with combination of single or multi panels. It can be installed horizontally or vertically. U-Shaped Baffle is an economic but long-lasting solution for external claddings. Shapes, Sizes, Colours, Materials, Metalium truly offers endless choices.

Panel (Aluminium):

Metalium make square edge P-50 series panels, 50 mm wide x 100 mm / 150 mm / 200 mm deep & 0.50 mm TCT Galvanized Steel as per IS-513. Panel length is up to approx. 3 mtr. Panel shall be coil / powder coated on external surface only. When two panels are to be joined, they shall be joined together by means of panel coupler suitable for U Shaped Screen Panel.

Paint Detail:

Coil coated panel shall be chromatized for maximum bond between metal and paint, enamelled twice under high temperature, one side with full primer and finish coat, the other side (Inner side) with a primer coating and skin coat on continuous paint line or Powder coated panel shall be 50 microns thick on exposed surface.

P-50 Carrier:

P-50 Carrier: Carrier shall be 20mm wide at bottom and 42 mm deep with cutouts to hold the panel in a module of 150 mm, carrier shall be roll formed out of 0.45 mm Galvanized steel and cut to a standard length of 2.4 mtr. When two or more carriers are to be joined, they shall be joined together by means of carrier coupler which will clip on to the holes in the sides of the cut carrier and hold them firmly in place while maintaining the module of 150mm centre to centre.

Installation detail:

The carrier shall be suspended from slab/truss by 4mm dia galvanized rod & height adjustment powder coated spring steel clips at maximum 1.2 to 1.5 meter Centre to centre. The 4mm dia galvanized rod shall be fixed to slab by forming one end “J” shape with roll inserts.

Edge Profile:

Edge profile shall be L- shaped, roll formed out of 0.5mm Galvanized steel / Aluminium strips with coil coating or powder Coating in standard colors.